Hootin’
in Houston !
There was hootin’
and hollerin’ in the streets of Houston throughout the weekend following
the Student Summit, the concluding event of our 2005
SNAME Maritime Conference & Expo and Ship Production Symposium (SMTC&E/SPS)
on Saturday, October 22. Admittedly, some of this jubilation might have
been for the pennant-winning Houston Astros, but undoubtedly most of it
was for another very successful annual conference and exposition. This was
a first time for the SMTC&E to be located in Houston, and we think all
will agree that the Hilton Houston-Americas and George R. Brown Convention
Center were ideally suited to handle the most expansive technical program
(over 70 papers, T&R discussions, panel presentations and student papers)
since the WMTC in San Francisco, the largest SNAME exposition ever (184
booths), and more awards, certificates and commendations including a second
Sperry Award since 2003! We also formalized the sponsorship campaign under
the able leadership of Bob Levine, which realized sponsorship in excess
of $100,000, or 250% better than our banner year in 2003! This helped to
provide free admission for the 128 registered students to attend the SNAME
Banquet on Thursday night as well as funding for Katrina-displaced SNAME
student members from UNO to attend and travel to Houston from their temporary
locations around the country. Read
more ...
~
Call for Late Discussions ~
We have
decided to hold open the deadline for late discussions of the SNAME papers
through 15 November. This is an opportunity for verbal discussions that
were presented at the paper presentations to be submitted in writing so
that they may be considered for publication with the papers in the Transactions.
New discussions may be considered as well.
All
Discussers are asked to follow the instructions located at www.sname.org/discussers.htm.
These discussions should be submitted expeditiously to facilitate consideration
by the authors.
Student
Program
(Report submitted by Matt Unger,
Chair, Student Steering Committee)
A
message to all of SNAME: Watch out for those students!!
This year’s SMTC&E
was attended by 128 students, which was over 20 percent of the conference’s
overall attendance! As in years past, the SMTC&E featured a Student Program,
and this year’s program was bigger and better than ever. The following
is a list and brief description of each event:
-
Student Job Fair
– This event gave students the opportunity to talk with company representatives
from most of the key sectors of the industry (offshore, commercial, government,
and marine engineering to name a few)
-
Student
Paper Presentations – Two technical tracks offered
seven student groups the opportunity to present their award winning papers
and design competition entries.
-
Student
Congress and Design Competition – This has always
been the highlight event of the student program, and this year was no different.
Students were tasked with building their own version of a modern lifeboat,
capable of being launched by way of a ramp into a test pool. The boats were
tested for their self-righting capabilities and crashworthiness, as determined
by whether any of their passengers (eleven Grade-A large eggs) had cracked
from the impact. All the teams should be commended for a job well done.
The winners, Team Breakfast Club and their lifeboat named “The Descrambler”
received a $500 prize.
-
Student
Steering Committee Meeting – Following the Student
Congress, the SSC held its annual meeting and elected a new group of SSC
officers. The new officers are already off and running to promote student
awareness and activity within all of SNAME. The 2005-2006 SSC officers are:
Matthew Unger – MIT – Chairman
Jared Leigh – University of Michigan – Vice Chairman
Stephen Gatz – University of British Columbia – Communications
Chair
Carrie Gonsoulin – Virginia Tech – Secretary/Treasurer
Clark Maxwell – Texas A&M, Galveston – Electronic Media
Chair
-
Student
Summit – Faced with low student retention and few
young members, this new event was a first step for SNAME to learn first
hand what our younger members expect from SNAME. With over 60 students and
18 SNAME leaders in attendance, an extremely lively brainstorming session
took place and has given SNAME and the SSC an overwhelming number of ideas
and input for improving the value of a SNAME membership. Over the next month,
look for a formal report from the SSC that outlines the finding from this
event. The Student Summit was an extremely exciting event right up to the
end, when President Compton promised to visit each of SNAME’s Student
Sections during the upcoming year. Thank you President Compton for showing
how much SNAME cares about its students!
Thanks
to ConocoPhillips, the Student Program Sponsor,
this year’s student registration to the SMTC&E also included attendance
to the SNAME Annual Banquet. All totaled, this year’s program can be
considered a great success. The number of students showing interest in SNAME
was extremely promising, and the SSC will do its part to make our student
numbers grow! Be prepared for another great program at the next SMTC&E,
but in the meantime, watch out SNAME: the students are coming on strong!
~
Continuing Education Credit for Professional Engineers ~
Over 100
applications for certificates of course completion were received from PEs
who took advantage of the fact that 61 of the SNAME and SPS papers and presentations
were accredited for continuing education credit. This is a 33% increase over
SMTC 2004, when only the SNAME papers were accredited.
Technical
and Research (T&R) News
During
the 2005 SMTC&E and SPS at Houston, the T&R Steering Committee, and
numerous other T&R Committees, panels, and Ship Structure Committee project
technical committees met with great success. Complete details will be posted
on the T&R web pages soon. The T&R Steering Committee meets three
times annually. Chairmen of the technical committees, the ad hoc panels, and
T&R representatives from the sections are included as members, and others
may attend at the invitation of the Steering Committee Chairman.

T&R
Steering Committee meeting in Houston was attended by 26 members and
several invited guests. |
For more
information on SNAME T&R activities, please see the T&R pages on the
SNAME website at: www.sname.org/technical_committees.htm.
Ship
Structure Committee

Ship
Structure Committee holds
Aluminum Panels Collapse Testing Project Meeting
On Friday at the SMTC&E and SPS, the Project Technical Committee (PTC)
for SR-1446 (titled, Mechanical Collapse Testing on Aluminum Stiffened Panels
for Marine Applications) held the kick-off meeting. The principal investigator,
Prof. Jeom Kee Paik of the National University of Pusan, provided the PTC
with the plans for what could become a classic SSC/SNAME report. The project
is jointly funded, with high T&R interest. Members please recall
that SNAME is one of the eight members of the Ship Structure Committee. Click
here for more information.
Lisnyk
Award
Article
appeared in Maritime Today:
AVEVA Congratulates University of Newcastle
SNAME
Maritime Technology Conference -- The University of Newcastle's School of
Marine Sciences & Technology today announces its M.Eng students have won
both first and third place in the prestigious 2005 Society of Naval Architects
& Marine Engineers (SNAME) conference. The accolades mark the ninth time
the school has placed in the top three since 1995: seven times in first place
and once in second. The Stage 4 Group Ship Design Project at the University
of Newcastle brings together M.Eng students studying for M.Eng (Hon) Marine
Technology in numerous disciplines. Read
more ...
back to top
|
Mentor Program
Attention
all SNAME Members!
Now is your chance to make a real difference

SNAME Student Mentor Program
Goal:
To provide SNAME Student Members with a personal contact in the industry
who can provide one-on-one guidance for decision making in academics and
career.
How
This Will Work:
Each mentor will be assigned one-to-three new Student Members, depending
upon preference (but no more than 3). Communication will be via e-mail
with a suggested occurrence of three contacts during the academic year
(or more per volunteer’s time). Depending on the number of volunteer
mentors, the program may be extended beyond new students to include existing
student members.
How
You Can Become Involved:
To become a volunteer mentor, you must be a SNAME member. If you are interested,
please contact Edith Nowak (enowak@sname.org).
One small contact can make a long lasting difference.
|
back to top
|
Student Section News
Stevens
Institute of Technology
At its October meeting the
student section heard a presentation, “Viability of High Speed Displacement Type Hull for High
Speed Trans-Ocean Sea Lift Operation” by Dr. Daniel Savitsky. The presentation was followed by a
discussion that covered the strategic interests concerning these types of hulls; particularly
transport factor, lift drag ratio, hydrodynamic efficiency and their design and operational
requirements. A second presentation, “Hydrodynamics for 21st century Seaplanes” was delivered
by Basil Papadoulous, and was followed by a discussion that underlined the importance of
understanding the hydrodynamics of seaplanes. The presentation covered design tools, inverse
hull design, spray characterization, forebody wake and afterbody dynamics, and the hull wave
interaction. Read
more ...
back to top
|
The Apprentice School - Design Project Partnership Opportunities
The Apprentice
School Student Chapter would like to offer its knowledge of
ship construction, assembly processes, construction techniques and construction
planning to other SNAME student chapters. The Apprentice School feels that
teaming with other student chapters with their extensive theoretical background
can stimulate a beneficial sharing of knowledge in ship design and construction.
The Apprentice School would like to create partnerships and share our knowledge
of construction as well as learn more about the engineering principles of
ship design which your student chapter has to offer. Read
more ...
back to top
|
PE Update
It is
interesting to note that there are still many members who are unaware of the
laws concerning the practice of engineering in their states or of the effect
those laws may have on their employment situations. In each of the 55 US licensing
jurisdictions there are sections of the administrative code that apply to
the practice of engineering and the requirements for licensing. It is typically
noted that an engineer is “a person who is licensed to engage in the
practice of engineering" while engineering is typically defined as
"service which requires engineering education, training, and experience
in the application of mathematical, physical, and engineering sciences to
such services or work as consultation, investigation, evaluation, planning,
and design insofar as they involve safeguarding life health or property."
If you
engage in engineering practice you should know the requirements of your jurisdiction.
42 of the 55 US jurisdictions already or will soon offer licenses in naval
architecture and marine engineering, implying that you will be out of compliance
if you continue to practice in those jurisdictions without a license. Go to
http://www.ncees.org, look up your state
board, and then go to your state’s web site to read the applicable licensing
laws and regulations.
In future
issues a broader discussion of licensing and exemptions will be attempted.
In the meantime, if anyone has questions please send them to Walter Maclean
at wmaclean@sname.org or David Chapman
at dchapman@sname.org. We will try
to respond promptly.
back to top
|
JETS - Pre-Engineering Times October 2005 Issue
Junior
Engineering Technical Society (JETS), focuses on opening the world of engineering
to junior high and high school students, parents and educators. JETS provides
information about engineering careers as well as programs and resources that
illustrate real-life teamwork and problem-solving skills. At the beginning
of this year SNAME became a participating member of JETS.
Click
here to view the October 2005 issue.
back to top
|
ASNE Events
Launch
and Recovery of Manned and Unmanned Vehicles
from Surface Platforms: Current and Future Trends
Sheraton Barcelo Hotel, Annapolis, Maryland
November 8-9, 2005
Read
more ...
ShipTech
2006
Advanced Technologies to Meet Shipbuilding Capability
and Affordability Needs
Panama City Beach, AL
January 24-25, 2006
Read
more ...
Joint
Sea Basing Symposium 2006
Arlington, Virginia
CALL
FOR PAPERS
Engineering
the Total Ship (ETS) 2006
Westin Arlington Gateway, Arlington, VA
CALL
FOR PAPERS
back to top
|
ICSOT
2006:
Design, Construction & Operation of
Natural Gas Carriers and Offshore Systems

|
|
Upcoming
Events
(Click on logos for details)
|
2006
SNAME Maritime Technology Conference & Expo and Ship Production
Symposium
October 10-13, 2006
Fort Lauderdale, FL |
|
Congress
on the Technology of the Ships of Trafalgar
11/03/05 - 11/05/05
Madrid,Spain |
|
Marine
Environmental Engineering Technical Symposium (MEETS)
01/23/06 - 01/24/06
Arlington,VA |
|
Pacific
2006 - International Maritime Conference
01/31/06 - 02/02/06
Sydney Convention & Exhibition Centre
Sydney,Australia |
|
World
Maritime Technology Conference 2006
3/06/06 - 3/10/06
London,England
Including
ICMES (10th International Cooperation on Marine Engineering
Systems). Click
here for details. |
|
International
Marine Design Conference
5/16/06 - 5/19/06
Ann Arbor, MI |
|
ICETECH
2006 - Int'l Conference & Exhibition on Performance of Ships & Structures
in Ice
7/16/06 - 7/19/06
Banff, Alberta, CANADA |
|
Propellers/Shafting
Symposium
9/12/06 - 9/13/06
Virginia Beach,VA |
|
ICSOT
2006
9/14/06 - 9/15/06
Busan, Korea |
 |
9th
International Conference on Stability of Ships and Ocean Vehicles (STAB)
9/25/06 - 9/29/06
Rio de Janeiro, Brazil |
back to top
|